Weco Lithium Battery Storage System
|
Greater security than the other lithium batteries, thanks to the ability to keep down the temperature of the nucleus of the cell even in the rapid discharge stage and high amperage. |
The CUBB LPBK batteries are equipped with 4 active BMS operating in symbiosis with individual arrays, while the heart of the battery the BMU assists each function inherent in the charge and the security processes. |
|
High charging and discharge capacity in a short time, also usable for the charging of electric cars. Number of cycles higher by more than 15% of common batteries Li-lon. Possibility of the current settings of charge and discharge directly by the battery software according to specific uses (BMU is programmable from a normal PC by the battery APP). |
DATA |
4K4 LFP – HeSU |
Rated Voltage |
51.2V |
Voltage Range |
44.8-58.4V |
Rated Ah |
86Ah |
Capacity |
4.4kWh |
Rated Power |
3kW |
Max Power |
5kW |
Cell Type |
LFP |
Max Cycles |
7000 |
Max Charging Current |
60A |
Max Discharging Current |
100A |
Charging Temperature |
-10℃/+45℃ |
Discharging Temperature |
-20℃/+60℃ |
Communication Interface |
CAN2.0/RS485/RS232 |
Battery Protection |
Over Charging/Over Discharge/Over Temperature/Over |
Precharge Control |
YES |
Size |
463*580*180mm |
Weight |
50kg +/- 3kg |
Installation |
Wall/Ground |
Design Life |
10 Years |
Storage time (-20℃~35℃) |
3 Months |
Standards |
CE, UN 38.3 IEC 61000 |
Guarantee Period |
7 Years |
IP Protection |
IP21 opt IP65 |
Extension |
Max 3 Units |
Software Programming
Easy and fast programming interface
Set up of the different BMS on few seconds
Firmware update easy and fast thanks to the special cable
Firmware modifiable to match different inverter also after years
More flexibility for stock and assignation
Smart and easy Debug function to save all the information on your PC Remote control and monitoring thanks to CUB8 Web APP
Usage data in CSV or Excel
Equalization test and health test just in one click